External covers

PP 45 AKR, PP 45 AKB

  1. Once the external plastering is complete, remove the plaster protective cover. Ensure that the wall sleeve projects by 0 to no more than 4 mm. Align the condensate drain vertically.
  2. Apply mounting adhesive provided by customer in dots or lines to the underside of the condensate drain (arrow) and attach it to the pipe sleeve.
  4. Seal the condensate drain on the exterior wall and pipe.

NOTICE: Safe condensate drainage must be ensured. No condensate should be allowed to penetrate between the wall sleeve and the exterior wall.

  1. Seal the external grille connecting piece with adhesive tape.
  3. Insert the external grille into the pipe sleeve and secure it in the wall sleeve using expansion claws.
  4. Use sealing plugs to close off the holes for the fastening screws. This prevents water from getting in.
  5. Seal the front cover to the exterior wall with permanently elastic and weatherproof sealant. Use silicone-free sealing material for PP 45 AKB.
  6. PP 45 AKB can be painted over with any façade paint.